HP Procurve Switch 2512 J4812A
12 RJ-45 10/100 ports

 

 

HP Procurve Switch 2512 J4812A is a low-cost, stackable, managed 12-port switch with 10/100 autosensing per port and 2 open transceiver slots for Gigabit or 100Base-FX. The HP Procurve switch 2524 and 2512 offer HP Auto-MDIXon all 10/100 and100/1000 ports and high availability features. They are ideal for low-cost migration to 10/100 managed switching with uplinks.

 
General Information
Manufacturer Hewlett Packard
Manufacturer Part Number J4812A#ABA
Product Line ProCurve
Product Name ProCurve 2524 Ethernet Switch
Marketing Information - 9.6 Gbps switch fabric integrated on-chip
- HP Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 100/1000 ports
- Single IP address management for a virtual stack of up to 16 switches
- Lifetime warranty: for as long as you own the product, with next business day advance replacement (available in most countries)
Manufacturer Website Address www.hp.com
Networking
Device Type Ethernet Switch
Ports 12 x 10/100Base-TX LAN
Ports Details
  • 12 x RJ-45 10/100Base-TX Port(s) LAN
  • 1 x DB-9 Console Port(s) Management
  • Expansion Slots 2 x Expansion Slot(s)
    Slots Details 2 x Expansion Slot(s)
    Flow Control IEEE 802.3x (Full-duplex)
    Media & Performance
    Connectivity Media Twisted Pair 10/100Base-TX
    Data Transfer Rate
  • 10Mbps Ethernet
  • 100Mbps Fast Ethernet
  • Performance
  • 6.6Mpps Throughput for 64-byte Packet(s)
  • 9.6Gbps Backplane Speed
  • Protocols & Management
    Protocols Supported
  • RMON 9
  • IGMP
  • SNMP v1
  • SNMP v2
  • RMON 1
  • RMON 2
  • RMON 3
  • Management Management:
    - hp Toptools for hubs & switches included
    - SNMPv1/v2c
    - RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events)
    - Extended RMON
    - RFC 1493 Bridge MIB
    - RFC 2674 802.1Q Bridge MIB
    - Web interface
    Status LEDs - Port status
    - Link activity
    Processor & Storage
    Processor 1 x ARM7TDMI 62.5MHz
    Memory
  • 26MB Main Memory
  • 2MB Flash Memory
  • Address Table 4K MAC Addresses
    Miscellaneous
    Additional Information - IEEE 802.3ad standard trunking: allows redundant connections between devices to be combined for more aggregate bandwidth between devices supporting LACP (Link Aggregation Control Protocol)
    - VLAN support, tagging, and Group VLAN Registration Protocol (GVRP): supports up to 30 port-based VLANs and dynamic configuration of 802.1Q VLAN tagging, providing security between workgroups
    - IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
    - IP multicast (IGMP): prevents flooding of IP multicast traffic
    - 802.1w Fast Convergence Spanning Tree: increases network availability by decreasing recovery time when a link fails
    - Latency: < 10 µs (LIFO)
    Certifications & Standards - IEEE 802.1p
    - IEEE 802.1D
    - IEEE 802.1Q
    - IEEE 802.3x
    - IEEE 802.3ad
    - IEEE 802.1w

    Safety:
    - EN 60950/IEC 950
    - UL 1950: CSA 950
    - Complies with NOM-019-SCFI-1994

    Emissions:
    - FCC Class A
    - EN 55022/CISPR-22 Class A
    - VCCI Class A

    Immunity:
    - EN 55024/CISPR 24 ESD: IEC 61000-4-2; 4kV CD, 8kV AD
    - Radiated: IEC 61000-4-3; 3V/m EFT/Burst: IEC 61000-4-4; 1.0kV (power line), 0.5kV (signal line) surge: IEC 61000-4-5; 1kV/2kV AC, 1kV signal, 0.5kV signal line
    - Conducted: IEC 61000-4-6; 3V
    - Power freq. magnetic field: IEC: 61000-4-8; 1A/m, 50 or 60 Hz
    - Voltage dips or interruptions: IEC 61000-4-11; > 95% reduction: 0.5 periods, 30% reduction: 25 periods
    - EN 61000-3-2/IEC 61000-3-2; harmonics
    - EN 61000-3-3/IEC 61000-3-3; flicker
    Power Description
    Input Voltage
  • 200 to 240V AC
  • 100 to 127V AC
  • Frequency 50 to 60Hz
    Power Consumption 36W
    Environmental Conditions
    Temperature
  • 32 to 131°F (0 to 55°C) Operating
  • -40 to 158°F (-40 to 70°C) Storage
  • Humidity 15 to 95% Operating
    Thermal Dissipation 123 BTU/h
    Physical Characteristics
    Body Color White
    Form Factor Rack-mountable
    Dimensions 1.8" Height x 17.4" Width x 8.0" Depth
    Shipping Dimensions 6.00" Height x 13.00" Width x 15.00" Depth
    Weight 6.0 lb
    Shipping Weight 11.46 lb
    Warranty & Support
    Standard Warranty Lifetime
    Parts Warranty & Labor Lifetime
    Additional Warranty Information - Lifetime Warranty for as long as you own the product