Telenetics FlashPoll DSP9612-LV industrial grade modems designed for harsh
environmental conditions with ultra Telenetics Telenetics FlashPolling times.

 Telenetics FlashPoll  10 to 53 VDC DSP9612-LV
Standalone low voltage DC powered LV DSP9612LV

Three models of the DSP9612 are available: Rack Mount (RM) for insertion into a RM16 nest, Standalone AC/DC powered (FP) and Standalone low voltage DC powered LV. Auto RTS is a new feature allowing multidrop for devices with 3 wire data interfaces and no control signals (no RTS signal) required.

This modem has 202T functionality at 9600 bps.  Ideal for SCADA systems, traffic automation and similar applications, the Telenetics FlashPoll DSP9612 is a cost-effective, full-featured Telenetics Telenetics FlashPoll, leased line modem with the fastest training time in the industry: 23msec RTS/CTS delay.   Telenetics FlashPoll is designed to optimize communication links where high speed or unlimited number of drops is necessary.
 
Triple Mode: QAM 9600 or 4800 bps, ITU V.23 and Bell202T
Fast train modem equalizer with 23 msec RTS/CTS delay @ 9600/4800 bps
DSP design with automatic adaptive equalizer
Leased-line or private wire interface
Line and power protected with heavy-duty surge protection
Standalone or nest card for RM16 nest
All settings are DIP switch selectable with no software code commands
Auto RTS allows multidrop for devices with 3 wire data interfaces.

Specifications

Mechanical Specifications

RM Form Factor
Rack-Mount Modem Card for the and the Motorola/UDS RM16M
Universal Data Shelf.
Dimension
9” x 6.25” x 0.87”
Weight
8 oz.


LV and FP Form Factor
Aluminum and Steel case
Dimension
5.70” x 8.30” x 1.50”
(144.78 mm x 210.82 mm x 38.1 mm}
Weight
1.9 lb. (227 grams)

 


Diagnostic Features
Front panel L.E.D. for status monitoring:
Power (PWR)
Request to send (RTS)
Clear to send (CTS)
Transmit data (TXD)
Receive data (RXD)
Data carrier detect (DCD)
Data set ready (DSR)
Analog loopback (ALB)
Digital loopback (DLB)
Front Panel loopback
control for testing:
Local Analog Loopback (ALB)
Local Digital Loopback (DLB)
Remote Digital Loopback (RDL)
(except V.23 Mode)

Data Format
8 or 9 data bits with 1 or more stop bits
Line Requirement
TELCO Voice band 2 or 4 wire leased line.
Private metallic circuits, 26 to 19 AWG

Operating Modes
2-wire half-duplex or 4-wire full-duplex

Modulation
proprietary (Telenetics FlashPoll Mode) and
FSK (V.23 or Bell 202T Mode)

Equalizer
Automatic, adaptive in Telenetics FlashPoll mode,
Fixed compromise in FSK mode

Training Time
(RTS to CTS delay)
Telenetics FlashPoll Mode: 23 ms
V.23: 33ms
Bell 202T Mode: 8, 33, 59, 219 ms

Cable Equalizer
Fixed transmitter and receiver cable equalizer

Power Supply (by model)
DSP9612RM, powered from RM16 Rack
DSP9612LV, 10 to 53 VDC
DSP9612FP, 85 to 265 VAC or 85 to 400 VDC

Surge Protection
Provided at power line and leased line;
Up to 15KV (Standalone version)

Carrier Control
Constant or switched, DIP switch selectable
Synchronization

Loss Recovery
Built-in Train on Data for Telenetics FlashPoll

Transmit
Output Level
+3dbm to –14 dbm, 1 db step
(DIP switch selectable)

Receiver

Dynamic Range
+3 to -30 dbm or -10 to -43 dbm
(DIP switch selectable)

Operating Temperature
-40ºC to +85ºC